Will a Chevrolet Corvette C7 ZR1 supercharger lid fit on a Chevrolet Corvette C7 Z06?

No, a C7 ZR1 supercharger lid will not fit on a C7 Z06. The two cars use completely different superchargers ¹.

As a matter of general automotive knowledge, the Z06's LT4 engine uses a 1.7L Eaton supercharger, while the ZR1's LT5 engine uses a significantly larger 2.65L Eaton supercharger. Because the blower housings are completely different sizes and designs, the lids are entirely incompatible.

If you are asking because you want to upgrade an earlier (2015-2016) Z06, you can install the updated, taller 2017+ Z06 lid onto your blower, provided you also swap to the 2017+ hood liner so the hood can close ⁵.

However, be aware that swapping to the taller lid on its own is generally a bad idea. The taller lid was designed to clear the updated, tilted intercooler bricks that GM introduced to improve cooling on the rear cylinders. Running the taller lid over the older, flat bricks doesn't improve cooling and has been shown to actually hurt power and torque by negatively altering the internal volume dynamics ³. If you want the cooling benefits, you need to swap the entire 2017+ supercharger assembly.